MotorData

Professional

Nissan Serena 2004, 2.0L. The engine is idling and stalls while driving

Nissan-Serena-QR20 Ignition coil

Nissan Serena 2004 with 2.0 liter engine. They tried to repair the car in another car service, but apparently to the touch. We could not connect with the scanner because the diagnostic connector is on 14pin. Such connectors are not in trend today …. The owner was looking for a long time, who can connect […]

TOYOTA IST 2008 with 1NZ-FE. Crankshaft position sensor signal (signal RPM)

002 1

TOYOTA IST 20081NZ-FE. The fault is not that complicated or special, but the time was spent more than the description of this article. I would say that such faults are difficult to analyze, although they are inherently simple. Until you check all possible versions, you lose time. Therefore, I will not show any parameters, the […]

Honda Fit GD 2006, Honda Fit ABS, battery and on -board voltage

1.007 Honda Fit 2006 ABS

Many of you have come across this. I handed the car to the client and explained something so that the person would not get on the same malfunction again. Another car stopped in the courtyard, stopped half a meter. And through the lowered glass, the driver begins to speak. No, so there is no conversation. […]

MMC Outlander 2016 (2.0 DOHC MIVEC). Car heating fan not working

MMC Outlander 2016 (2.0 DOHC MIVEC). Car heating fan not working

The car heater fan is not blowing. There is no need to connect a scanner here. Everything is clear with a malfunction (does not work). But the error is such that you need to decide. Need to figure out what exactly is wrong? How to make sure that when checking, you don’t create difficulties for […]

Toyota Vitz 2004, 1NZ-FE. RPM shuttering and error P0505 (DTC P0505)

Toyota Vitz 2004, 1NZ-FE. RPM shuttering and error P0505 (DTC P0505)

RPM shuttering and error P0505 (DTC P0505) in Toyota Vitz 2004, 1NZ-FE Toyota Vitz 2004. According to the client, engine revs shudders. I’m looking around. The car is parked, the engine is running. The car revs does not vibrate. I see that the rpm is too high. Then I ask clarifying questions when this happens: […]